EMCO Meter Run with Transmitter Flanges for Compact Mounting, Type CompaQ

Principle: EMCO Meter Run type CompaQ is used as primary element in flow measurement of liquid, gas and steam according to the differential pressure principle.

The differential pressure transmitter and 3 way manifold valve is mounted directly on the CompaQ ensuring an faster and more safe installation on site.

Sizing of the product
DN
Inches
Total length (mm)
10
3/8”
400 mm
15
½”
550 mm
20
¾”
700 mm
25
1”
900 mm
32
1 ¼”
1100 mm
40
1 ½”
1300 mm
50
2”
1500 mm
65
2 ½”
1600 mm
80
3”
1800 mm
100
4”
2200 mm
Edit

Model

M96

Table size

1100*550 mm

Supply Ability

1000 Sets/Year

Cutting rate

15 m/min

Construction
Design and calculation standards
ISO/TR 15377, ISO 5167, BS 1042, ASME MFC-14M, MFC-3M, DIN 19205, Shell Flow Meter Engineering Handbook
Sizes
DN 10 – DN 100, 3/8” - 4"
Pressure rating
PN 10 - 400, 150 - 2500 lbs
Plate thickness
3 mm
β (d/D)
preferred range 0,5 < β < 0,7 for highest accuracy.
Vent or drain hole
Not recommended
Material
AISI 316, other on request
Pipe run
Can be honed for increased accuracy
Pressure taps
Transmitter flanges with a 54 mm centre distance
Connection
Flanges with flat or raised face or groove according to DIN 2526, 2513 or 2512, or RF and RTJ according to ANSI B 16.5
Orifice plate shapes
Square edge concentric, conical, 1/4 circle, segment
Marking
The carrier rings are marked with "+" and "-" and flow direction
Technical Data
Accuracy
+/- 0,75 - 1 %(square edge plate), +/- 2 %(conical), +/- 2 - 2,5%(¼ circle)
Pressure loss
Depending on β, for β equal to 0,6 : ca. 60 % of the differential pressure measured
Limits for Reynolds No
Re > 1260 x β2 D according to ISO 5167 1000 < Re < 108 according to ASME MFC-14M
Accessories
3 valve manifold, double flanged
Condensing chamber unit for steam flow (only horizontal pipe line)
Edit

Model

M96

Table size

3.60*1.80 ft

Supply Ability

1000 Sets/Year

Cutting rate

49.21 ft/min

Product Parameter
Travel
X, Y, X Axis
Max. Load of table
1322.77 Lb
Beam MLD
30.57 ft
Depth MLD
15.41 ft
Draught Summer
5.9 ft
Equipment
Main Generator Sets
4x CAT 3412C TA, each 500 ekW at 1500rpm
Emerg/Harbour Gen set
1x CAT 3406C TA, 215 ekW at 1500rpm
Standard Accesories
Controller system
Pneumatic system
Full enclosed cover
RS 232 Interface
Spindle encoder position system
Operation unit
Three axis inner encoder feedback system
Working light
Auto lubrication system
Tool and tool box
Optional Accesories
Siemens controller or other controller system
Screw type auto conveyor
Spindle oil coolant
Chain type tool magazine
Umbrella type tool magazine
4 Axis rotary table
Arm type tool magazine
Ring spray spindle